Akikazu
-
Content Count
50 -
Joined
-
Last visited
Posts posted by Akikazu
-
-
As per name, exiled bot is a bot that has been exiled.
-
No such thing corrected file. The default one is the correct one. Means that u need to complete the second char quest manually. Alas, if u need to farm area but havent complete the main quest until Epilogue, u have to manually adjust the coordinate. I'm too lazy to test it myself since I'm not farming area. What I can suggest is, try adjust the X value to higher value. Lets say X=145, try put 150 or 155 and check. If bot wrongly click the Part, adjust the Part value and if bot wrongly click at Act, adjust the Act value.
act_first_tab1 should be the Epilogue.
- 1
-
If one of the characters completed until the Epilogue, the coordinate need to change. Usually happens for account creating second character with first one already do the mapping. Just adjust a bit the coordinate file. Please back up first before u do anyway.
QuoteCoordinate.ini
[area_selection]
part_first_tab3_x=122
part_first_tab3_y=65
part_second_tab3_x=187
part_second_tab3_y=65
part_third_tab3_x=247
part_third_tab3_y=65
part_first_tab2_x=155
part_first_tab2_y=65
part_second_tab2_x=215
part_second_tab2_y=65
part_first_tab1_x=185
part_first_tab1_y=65act_first_tab5_x=100
act_first_tab5_y=85
act_second_tab5_x=140
act_second_tab5_y=85
act_third_tab5_x=183
act_third_tab5_y=85
act_fourth_tab5_x=225
act_fourth_tab5_y=85
act_fifth_tab5_x=265
act_fifth_tab5_y=85
act_first_tab4_x=125
act_first_tab4_y=85
act_second_tab4_x=165
act_second_tab4_y=85
act_third_tab4_x=205
act_third_tab4_y=85
act_fourth_tab4_x=245
act_fourth_tab4_y=85
act_first_tab3_x=145
act_first_tab3_y=85
act_second_tab3_x=185
act_second_tab3_y=85
act_third_tab3_x=230
act_third_tab3_y=85
act_first_tab2_x=167
act_first_tab2_y=85
act_second_tab2_x=205
act_second_tab2_y=85
act_first_tab1_x=185
act_first_tab1_y=85Just a bit the value for the Act needed. +/- the X value not the Y.
-
-
in coordinates files change map device line for this one this work for 5 slot atlas
[map]
; Map Device
map_device_inventory_x=218
map_device_inventory_y=279
map_device_open_button_x=215
map_device_open_button_y=375
map_device_offset_x=17
map_device_offset_y=17- 1
-
Obviously your Forum Username and the Key u purchased (from Manage Purchases).
-
10 hours ago, KevDoesntUseAbot said:@Akikazu Could you give me a hint, why my Bot isnt using leap slam?
Just walking normally. Used the settings from your left_mouse and leap slam.Left mouse wont work with movement skill like leap slam even if u play normally. So u need to set left mouse as Move Only and another key (mine is W) for leap slam.
-
20 hours ago, TheBig said:That is amazing. Thank you for such a detail explanation. Your guide will help not only me but many people coming to this site.
When I added more skills in the bot setting using " CTRL + E" didn't work. Does it have to be capital letters? I know I didn't use capital letters. is there a space between "CTRL" " + " and "T" or "E" ?
Put "T" or "E" and tick the Second Bar option.
@KevDoesntUseAbot For aura, I suggest put on second bar while buff/golem should always not on second bar or the bot will have problem casting it.
- 2
-
This should be asked at POE Official forum instead of here.
-
One of my bot build is cyclone zerker with warcry. Thus my config will have warcry, cyclone, leap slam, berserk, aura and ancestor totem summon.
Left Click: Warcry
Right Click: Cyclone
Middle Mouse: Golem
Q: Warcry
W: Leap Slam
E: Totem
CTRL + E: Flesh and Stone (Blood Stance)
R: No skill
CTRL + R: Herald of Ash
T: Berserk
CTRL + T: Hatred
Noticed that I put cooldown at totem summoning because I dont want the bot to keep spamming the totem (the totem wont even have time to attack if u keep summoning them). Warcry is set to according my warcry cooldown and also for left click I change to warcry to make sure the bot keep casting warcry. About the priority, u can check my cyclone priority is lower because I wanted my bot to cast berzerk first, then totem, next cyclone to enemy. If enemy is distance 30-60, so bot will berserk, totem then leap slam before cyclone.- 2
-
2 hours ago, TheBig said:Thank you so much for detail explanation.
Now I understand that main skill should be set at higher number for higher priority. Now the distance also affect just as importantly as higher number. I just discovered today while I was watching the bot's behavior.
I can't still grasp whole logic of how it works. When 2 skills are set at same priority, it seems distance is the factor that bot determines priority. You said Cyclone and Leap slam are set at priority "3" and distance is set at same distance "50" but Leap slam has min. distance 20 and bot will do Leap slam first. Is it because Leap slam has Min. distance set?
Since cyclone min distance is set to 0, means that when enemy is at distance 50, leap slam will occur first as once it reach the enemy, the distance will become less than 20 which means leap slam wont be used anymore. Actually the bot will weight itself the behavior, sometimes u can see it cyclone (less than a second) then it leap slam before continue to cyclone again. Especially when there is a terrain blocking, u'll notice bot will cyclone a bit but cannot reach enemy (stuck for obstacle) then will leap slam if the distance is more than 20 and less than 50. So in my opinion it is best not to set same condition for a skill (unless it is aura/minion/golem). Mine, leap slam is 30-60 as I prefer it to leap slam and stun enemy first before cyclone.
- 1
-
3 hours ago, TheBig said:I can see your priority is set "3". Mine is "1". I am confused with this priority setting. I saw someone saying " 1" is higher priority than " 2, 3.." etc.
so "1" is highest priority. but some say higher number is the higher priority even like 9.
Have you noticed actually 3 is higher priority than 1? Did anyone actually test which is higher priority between these numbers?
Higher number will yield higher priority. So if Cyclone is at 3, other skills that is set lower than 3 will be cast lesser than cyclone. But if u set other condition (like cooldown, distance, etc), the priority will check upon same condition first. So as example:
Cyclone max distance set to 50, priority 3. Leap Slam set to min distance 30, max distance 50, priority 3. Thus if enemy is at distance of 50 from u, Leap Slam will be cast first. Then cyclone. If enemy distance is 20, it will cyclone all da way there.
-
Mine working good with setting distance 50. The priority setting also took important part.
-
Try this one, it's free and works like POE Smoother.
- 1
-
Try some tools like POE Smoother or the free one to do the black out texture. The ping spikes due to FPS drop as well.
-
Do u mind attach ur map.ipd to check? Anyhow, the map tier is ruined which need complete overhaul. Since the tier was for previous atlas (way ages ago atlas).
-
Yeah, kindly set your map.ipd to run tier 1 to tier 16 as well. Also in map.ipd got config to run magic and rare maps or ignore it. So might need to check as well.
-
You have to declare all the tabs used; dont start like that 3,4,5,6.
So your setting should be:Stash Tab: 1,2,3,4,5,6,7,8
Currency Tab: 1,2
Map Tab: 8 -
15 hours ago, PoeTrippin said:Does anyone ever run it in blackout mode? Its like 140fps with few spikes just curious if it even works.. (useing PoE Smoother)
It is working with blackout mode.
-
The dev did something on their end (prolly server-sided of the bot). That's all I know. Given how cheap the price of the bot is, I'm sure the dev doesnt care a lot especially when only left one dev to work it out.
-
-
1 hour ago, V4mpyr said:What is this -nopatch method you're speaking of? Perhaps it's something that should be stickied so EVERYONE can know about it and what to do when the bot goes down.
From all I know that this forum has not been actively updated due to lack of dev and community support. Even the guide some are ages ago. Anyhow, PM me for quick around fix for the bot.
-
My personal opinion, stop supporting if u are so dissatisfied with the product. The bot is working fine before the last minor update (hotfix) causing the offset to change. And the dev not 24/7 facing this forum to check for it. User should know which POE patch is needed to update or not, hence that is why the --nopatch is used; to avoid bot being broken again while waiting for a fix.
- 1
-
Also as reminder, if u run the bot program (with the profile activated with the same key), regardless u pressed Start Bot or not, it will trigger the "You have to be Elite to use the bot". So to prevent that, set one PC/VM only one key. Thus, u need to remember every time there's a patch, u need to reconfig the key again.
- 1
Premium stash tab
in Exiled Bot Issues and Bug Report
Posted · Report reply
No worries, the bot use premium currency tab just fine either transmute, augment, alchemy or even chaos-ing the map.